Solenoid valve can not turn off the solution

Solenoid valve may occasionally appear when the solenoid valve can not be closed phenomenon may be due to: the main spool or iron core seal has been damaged, the fluid temperature, viscosity is too high, there are impurities into the solenoid valve, Spring has reached or deformed and so on. What should be the solution to these problems? The following will analyze the reasons why the solenoid valve can not be turned off and the solenoid valve can not turn off the solution. 1, the main spool of the seal damage: Solution: It is recommended to replace the seal. 2, orifice balance hole blocked: solution: timely cleaning. 3, viscosity or fluid temperature is too high: Solution: It is recommended to change the counterpart of the solenoid valve. 4, there are impurities into the solenoid valve spool: Solution: In this case, it is recommended to clean. 5, the spring deformation: Solution: It is recommended to replace the spring. 6, the working frequency is too high lead to life expectancy has been: Solution: It is recommended to re-election products or update products. Through the analysis of the above six phenomena and the experience of previous experience, we can conclude that there will be problems when using the electromagnetic valve, but thankfully, we have corresponding solutions to these problems. Such products are more trustworthy to users. With the increasing use of solenoid valves, researchers and related businesses may need to be more work and preparation to meet the needs of the market.