Diaphragm pump _ Diaphragm pump works

Diaphragm pump .mini diaphragm pump, also known as the control pump, is the main type of actuator, by receiving the modulation signal output from the control unit. Diaphragm pumps operate with power to change fluid flow. Diaphragm pumps have four materials: plastic, aluminum, cast iron, stainless steel.

Electric diaphragm pump which has four kinds of material: plastic, aluminum, cast iron, stainless steel. Diaphragm pumps are based on different liquid media were nitrile rubber, neoprene, Viton, polyvinylidene fluoride, polyhexamethylene. To meet the needs. Placed in a variety of special occasions, used to pump all kinds of conventional pumps can not be aspirated medium.

Diaphragm pump works: 1, compressed air as power. 2, is a volumetric displacement pump caused by the reciprocating deformation of the diaphragm, its working principle is similar to the plunger pump, the diaphragm pump has the following characteristics because of the working principle of the diaphragm pump: the pump will not overheat: the compressed air is the driving force , When the exhaust is an expansion of endothermic process, pneumatic pump temperature is reduced, no harmful gas emissions.

Will not produce spark: Pneumatic diaphragm pump without electricity as power, grounding and then prevent static sparks can contain particles of liquid: Because the volume of work and import for the ball valve, so it is not easy to be blocked. Flow rate can be adjusted, you can install a throttle in the material outlet to regulate the flow.

Self-priming function. It can be run dry without danger. Can dive work. The fluid that can be delivered is extremely wide, ranging from low viscosity to high viscosity, from corrosive to viscous. No complicated control system, no cables, fuses, etc. Small size, light weight, easy to move. Easy maintenance without lubrication, will not pollute the work environment due to drip.

The pump is always efficient and will not be reduced by wear. 100% energy utilization, when the exit is closed, the pump automatically shut down, the device moves, wear, overload, fever without dynamic seal, easy maintenance to avoid leakage. No dead spots at work. Pneumatic diaphragm pump is a new type of conveying machinery, is currently the most novel kind of pump.

The use of compressed air as the power source, for a variety of corrosive liquids, with particles of liquid, high viscosity, volatile, flammable, highly toxic liquid can be smoked exhausted. Pneumatic diaphragm pump has four materials: plastic, aluminum, cast iron, stainless steel. Diaphragm pumps are based on different liquid medium were nitrile rubber, neoprene, fluorine rubber, PTFE, polyhexamethylene. To meet the needs of different users. Placed in a variety of special occasions, used to pump a conventional pump can not be aspirated medium, have achieved satisfactory results.

Pneumatic diaphragm pump Pneumatic diaphragm pump is a new type of conveying machinery, using compressed air as the power source, for a variety of corrosive liquids, with particles of liquid, high viscosity, volatile, flammable, highly toxic liquids, can be pumping Light exhausted. The main features of this pump pneumatic diaphragm pump, stainless steel pneumatic diaphragm pump, QBY pneumatic diaphragm pump. Pneumatic diaphragm pumps, the use of compressed air as the power source, for a variety of corrosive liquids, with particles of liquid, high viscosity, volatile, flammable, highly toxic liquid, can be smoked exhausted. A plastic, aluminum, cast iron, stainless steel four kinds of material, is a new type of conveyor machinery.

Working principle and characteristics: Pneumatic diaphragm pump is a kind of volumetric pump with compressed air as the driving force and volume change caused by the reciprocating deformation of the diaphragm. The working principle of the diaphragm pump is similar to the piston pump.

Due to the working principle of the pneumatic diaphragm pump, Pump has the following characteristics: (1) the pump will not overheat: the compressed air as a driving force, when the exhaust is an expansion endothermic process, pneumatic pump temperature is reduced, no harmful gases discharged. (2) does not produce spark: pneumatic diaphragm pump without electricity as power, grounding and then prevent the static spark (3) can contain particles of liquid: because the volume of work and imports for the ball valve, so it is not easy to be blocked. (4) Extremely low shear force on the material: How to suck in the work and how to spit it out, so the material agitation is minimal, which is suitable for the transportation of unstable substances (5) The flow rate can be adjusted, and the section can be installed at the exit of the material Flow valve to regulate flow. (6) Self-priming function. (7) Can be air operated without danger. (8) can dive work. (9) The fluids that can be delivered are extremely wide, ranging from low viscosity to high viscosity, from corrosive to viscous. (10) There is no complicated control system, no cables, fuses and so on. (11) small size, light weight, easy to move. (12) Maintenance is easy without lubrication, and will not pollute the work environment due to drip. (13) The pump is always efficient and will not be reduced by wear. (14) 100% energy utilization, shut down the outlet, the pump automatically shut down, the device moves, wear, overload, fever (15) no dynamic seal, easy maintenance to avoid leakage. No dead spots at work.

Electric diaphragm pump Electric diaphragm pump is a new type of pump. In recent years, it has been used in petrochemical, ceramics and metallurgical industries due to its breakthrough in diaphragm material. It features no need of filling water and self-absorption capacity Strong.

And the pump itself Sea shaft seal, greatly extended service life. Applications: Spraying paint, ceramic diaphragm pump has occupied the absolute dominance; environmental protection, wastewater treatment, construction, sewage, fine chemicals is expanding its market share, and has other pumps irreplaceable status.

Five major features: 1, without filling the water, self-priming capacity of more than 7 meters. 2, through the good performance, the diameter of 10 mm below the particles, mud, etc. can easily through. 3, as the diaphragm will be transported media and transmission machinery separate, so the media will not leak to the outside. And the pump itself without shaft seal, greatly extend the service life. According to different media, the diaphragm is divided into neoprene, fluorine rubber, nitrile rubber, etc., fully meet the requirements of different users. 4, small size and light weight: As a result of the planetary cycloidal transmission structure, so the pump to get a small size, as compared with the same type of pump, the volume and weight are down about half. 5, the pump medium flow through the part, according to user requirements, divided into cast iron, stainless steel, rubber lining, the motor is divided into ordinary type, explosion-proof, speed regulation.